Diamond Products CC6560XLJ - Manual (Page 26)

______________________________
Blade / Engine Speed (RPM) Chart
Model CC6560XL Concrete Saw
______________________________
WARNING:
Blade Size
Max. Depth
of Cut
20" 7-5/8" Sheave Size
26" 10-3/8" 3.60"
30" 11-3/4" 3.60"
36" 14-3/4" 3.60"
3.60"
CAUTION:
#6010631 Blade Spacing Kit (Up to 2" width) - Includes Shaft Extension, 4-1/2" Outer Flange, Nut, 20" Wide Blade Guard.
#6010632 Blade Spacing Kit (Up to 4" width) - Includes Long Shaft Extension, 4-1/2" Outer Flange, Nut, 20" Extra Wide Blade Guard.
#6010633 Side Plunge Kit (Up to 6" width) - Includes Bladeshaft, 8" Flanges, and 20" Side Plunge Blade Guard.
#6011170 Magnetic Spotlight Kit - Includes 12 Volt Light with Magnetic Base, Power Outlet, Toggle Switch.
#2501226 Catalytic Converter Kit - Includes Catalytic Muffler.
#6010596 Glow Plug Kit - Includes Glow Plug and Wire Lead.
#6010630 Blade Stacking Kit (Up to 1-1/2" width) - Includes 4-1/2" Extended Outer Flange, 5" Bolt, 20" Wide Blade Guard.
#6010112 Spotlight Kit - Includes 12 Volt Light, Mounting Bar and Bracket, Lock Knobs, Toggle Switch.
#6010522 Water Safety Switch Kit - Includes Safety Shut-off Switch, Relay, and Toggle Switch.
#6010179 Free Wheeling Clutch Kit - Includes Clutch Sprocket and Hub, Engage/Disengage Lever, Linkage.
#6010227 Lowering Speed Metering Valve Kit - Includes Metering Valve, Check Valve, Hydraulic Hose & Fittings.
6010039
(6.00")
Options Available:
#6011032 Water Pump Kit - Includes 12 Volt Pump, Toggle Switch, Hose and Fittings.
Outer Flange
(Flange Size) 6010037
(4.50")
6047907
(5.00")
6010039
(6.00")
2501009
(5/3VX530)
Inner Flanges
(Flange Size) 6010036
(4.50")
6010255
(5.00")
6010038
(6.00")
6010038
(6.00")
Engine Belts (10)
(Belt Size) 2500371
(3VX500)
2500371
(3VX500)
2501009
(5/3VX530)
6010608
Bladeshaft Sheave, 1-3/4" Bore
(Sheave Size) 6010545
(4.50")
6010573
(5.00")
6013046
(6.00")
6013046
(6.00")
Blade Guard Assembly 6010602 6010604 6010606
When changing blade size, use chart shown below for selecting items that must be changed.
Model CC6560XL 20" 26" 30" 36"
36" 1,500 6.00" 2,500
30" 1,800 6.00" 3,000
26" 2,150 5.00" 3,000
20" 2,400 4.50" 3,000
No Load RPM Sheave Size No Load RPM
Do not exceed bladeshaft speed (RPM) shown for each blade size. Excessive blade speed
could result in blade breakage and serious personal injury.
Blade Size Bladeshaft Engine