Multichannel Systems HE-Inv-25 User Manual
Multichannel Systems Equipment

Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany
Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
Scope of delivery:
1 HE-Inv-8
OR: 1 HE-Inv-12
OR: 1 HE-Inv-25
8 srews (M3 x 5)
HE-Inv-8
HE-Inv-12
HE-Inv-25
Heating Element with PT100 Sensor for MEA1060-Inv
and MEA1060-Inv-BC Amplifiers
(The number in the product name 8, 12 and 25 defines the diameter of the bore hole in the middle
of the amplifier for the invert microscope).
Warning: The device may only be used together with the MEA1060-Inv and
MEA1060-Inv-BC from Multi Channel Systems MCS GmbH, and only for the specified
purpose. Damage of the device and even injuries can result from improper use.
!
For installation you need the heating element
HE-Inv-8 (or HE-Inv-12 or HE-Inv-25)
and 8 provided screws.
Installation:
1. Turn the ground plate of MEA1060-Inv
(or MEA1060-Inv-BC) amplifier upside down.
2. Mount the heating element carefully with back
side up and with all 8 srews onto the ground
plate of the MEA amplifier.
3. Connect the plug socket of the heating element
and save the cable at the rim of the amplifier’ s
ground plate with 2 screws.
Heating Element
Back side
Front side