Multichannel Systems ADPT-Om-ME_W-SG - Manual

Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2012 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
ADPT-Om-ME/W-SG
Adapter between the Omnetic Connectors on the μPA of the ME-System
and on the Headstages of the Wireless-System and the Signal Generator
Omnetic socket on W8- or W16 headstage
Single row precision socket for ME/W-SG
Scope of delivery: 1 ADPT-Om-ME/W-SG
ADPT-Om-ME/W-SG
Please insert into this Omnetic socket the μPA or the wireless W8
or W16 headstage, which are equipped with Omnetic connectors.
Important: Take care for the correct orientation!
There are two guide posts on the left and on the right side
of the lower pin row of the Omnetic socket, which have
to fit to the guide posts of the connector.
Guide posts
Plug the ME/W-SG into this single row precision socket.
When looking on the service side of the ME/W-SG,
the white connector on top of the W16 headstage
has to be on the left side!
Wireless headstage
with Omnetic connector
ADPT-Om-ME/W-SG
ME/W-SG
Important: Take care for the different orientation of the W8 and the W16 headstages!
Please connect the ME/W-SG into the ADPT-Om-ME/W-SG as shown on the photo!
W16 headstage W8 headstage
When looking on the service side of the ME/W-SG,
the white connector on top of the W8 headstage
has to be on the right side!
right left