Multichannel Systems MEA-System Manual - Manual (Page 8)

2.2 System Configurations and optional Components
Multi Channel Systems MCS GmbH provides several complete standard configurations and custom
systems. This chapter will give an overview on different system configurations. Please see also
both handouts “MEA - System Suggestions” and “USB-MEA-Systems - System Suggestions”,
which show diagrams of several typical setups.
Please note that you have various options for setting up your personal (USB-) MEA-System
configuration. For more information about the scope of delivery of your system, please see
the separate shipping documents.
Please see the separate documentation for information on installing and operating the individual
components of your (USB-) MEA-System. All warnings and safety related information of the
separate documents apply and must be regarded.
Do not hesitate to contact MCS or your local retailer if you are interested in a particular setup
or if you have other questions.
2.2.1 Single Components for MEA-Systems
The following components are part of (USB-) MEA standard systems. Please make sure that
you have carefully studied the documentation on the single components before setting up
your system. All manuals can be found on the installation volume shipped with the system.
Updated versions can also be downloaded from the Multi Channel Systems MCS GmbH web site.
Web link to the manuals download page on the MCS web site:
http://www.multichannelsystems.com/downloads
Product Manual / Reference
MEA2100-System in different configurations MEA2100-System Manual
USB-MEA256-System for MEAs with 256 electrodes USB-MEA256-System Manual
USB-ME64-, 128-, 256-Systems data acquisition for
one, two or four MEA1060 amplifiers USB-ME64- 128- 256-System Manual
MEA1060 amplifier(s) with or without blanking
circuit for upright or Inverse microscopes with custom
bandwidth and gain settings MEA Amplifier (with Blanking Circuit)
for Upright / Inverse Microscopes Manual,
MEA_Select Help
MEA probes MEA Manual
Temperature controller TC01 or TC02 TC01/2 Manual
Perfusion cannula PH01 with programmable fluid
temperature (systems with enhanced perfusion E only) PH01 Manual
Perfusion Peristaltic System PPS2 for perfusion
control (systems with enhanced perfusion E only) PPS2 Manual
Magnetic Perfusion Holder MPH to fix the PH01 MPH Datasheet
MEA Signal generator MEA-SG for systems with 60,
120 or 256 electrodes 60-, 120-, 256MEA-SG Datasheet
Test-MEA for systems with 60, 120 or 256 electrodes 60-, 120-, 256-TestMEA Datasheet
Data acquisition and analysis software MC_Rack and
MC_DataTool MC_Rack Manual / Help, MC_Rack
Tutorial
Data acquisition and analysis software LTP-Director LTP-Director Manual / Help
Data acquisition and analysis software Cardio2D Cardio2D Manual / Help