Multichannel Systems MEA1060-Up-BC Manual - Manual (Page 28)

MEA Amplifier with Blanking Circuit for Upright Microscopes
28
For information on the gain and filters of the MC_Card data acquisition system,
please see the ME- / MEA-System manual. For more information on gain and filters
in general, please refer to standard literature or contact your local retailer.
If you use a MEA-System, the isolated power supply IPS10W that is integrated in the data
acquisition computer supplies the power for operating the MEA amplifier. The power is
distributed along the MCS high grade cable. Please consider that the amplifier can only
operate properly if the supply voltage and current specifications are fulfilled, especially if you
use a custom power supply. See also the Technical Specifications and the Troubleshooting section.