Multichannel Systems MEAS42+MEASwitchUSB Manual - Manual (Page 13)

9
4 Operating the MEA Switch
4.1 Controlling the MEA S4/2
The 240 channels from four 60 channel amplifiers are reduced to 120 channels. You can decide
from which of the four amplifiers a channel should be picked. The channel selection is mutually
exclusive, that means, channels with the same channel number, for example No. 21, cannot be
picked from both amplifiers. If you use a MC_Card with 240 channels or an USB-ME240-System,
you can use a MEA S4/2 for two pairs of 60 channel amplifiers.
The operation of the MEA S4/2 is computer-controlled via USB port. You can easily make your
selection with the MEA Switch USB software program.
Double-click the MEA Switch USB.exe file.
- OR -
Double-click the MEA Switch USB icon on your desk top.
The MEA Switch USB program starts.