MPM ss-1803 - Manual (Page 11)

11
GB
Proper disposal of the product
(used electrical and electronic goods)
The markings on the product indicate that once its working life is over it should not be disposed of with
other household waste. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, when the device is worn out it should be taken to a collection point for used appliances
or collected from home. For detailed information on where and how to safely dispose of electrical and
electronic waste, contact the retail outlet or local Department of Environmental Protection. The product
must not be disposed of along with other municipal waste.
Poland
4. Select the required drying speed and temperature.
5. Set the switch to „1” for a moderate air flow.
6. Set the switch to „2” for a strong air flow.
7. Use switch (1) for cold air flow (for model SS-1803).
8. After drying, set the switch to 0.
CLEANING AND MAINTENANCE
1. The hairdryer does not require any special maintenance. Simply keep to the following rules.
2. The appliance should be kept clean for it to work properly. Never cover the air outlet as this could
easily lead to the appliance overheating.
3. Always unplug the appliance after drying hair or before cleaning it.
4. The air nozzle should be cleaned with a brush from time to time.
5. The casing of the appliance may be cleaned with a damp cloth.
6. After drying, wait until the dryer cools down.
7. Do not wrap the power cord around the appliance!
TECHNICAL SPECIFICATION
Moc:
Model SS-1205: 1200 W
Model SS-1206: 1200 W
Model SS-1803: 1800 W
Power supply, AC power network: 230 V ~50 Hz
Noise level:
SS-1205: L
WA
= 62 dB
SS-1206: L
WA
= 64 dBWA
SS-1803: L
WA
= 72 dB
WARNING! Do not use this appliance near water.
IMPORTANT! MPM agd S.A. reserves the right to make changes in the product without
prior notification!