MPM MLW-01 User Manual
Page 13
1
GB
2
3
1
6
7
4
5
8
APPLIANCE DESCRIPTION MLW-02
1. Housing
2. Round with horsehair brush
3. Switch ON/OFF
- air blow control with two settings
4. Accessories blocking button
5. Voltage setting switch 115/230V
6. Rotary power cable
7. Hanging handle
8. Ventilation grid
HOW TO USE THE UNIT MLW-02
1. Connect the unit to the power socket. Make sure, that the switch (3) is set to „0” position.
2. The curling brush is equipped with a two-setting switch for air blow control (3)
3. Please, set the switch to „1” position in order to set a low flow of air or to „2” to set a high flow of
air.
4. Before you begin to style the hair, dry it so that the end sections are a little wet.
5. In order to achieve better effects for a longer period of time, you can use hairspray before the
curling.
6. At hot air blowing, the hair curling is long-lasting and springy.
7. The average curling time depending on user’s needs amounts to 5 - 15 seconds for one hair
streak.
8. The unit is equipped with:
- Rotary power cable (6), which facilitates the use of the product.
- Supply voltage setting switch 115/230V (5).
- Hanging handle (7).
- Accessories blocking button (4), which can be used to remove the round brush (2).
Note: Don’t use the voltage setting switch 115/230V during the operation! If the voltage setting is
wrong, the product will be damaged.