MPM MKE-08 - Manual (Page 13)

13
GB
Heating power:
Select the heating power function with the function button y , the control light will turn
on under the heating power sign 4a and then set an appropriate value by adjusting the
potentiometer w to left or right in the range from 200 to 1800 W. The higher the power, the
faster the device heats up, which appreciably reduces the time of preparation.
Temperature:
Select the temperature function with the function button y , the control light will turn
on under the temperature sign 4b and then set an appropriate value by adjusting the
potentiometer w to left or right in the range from 60 to 240 0 C.
Timer:
Select the timer function with the function button y , the control light will turn on under the
timer sign 4c and then set an appropriate value by adjusting the potentiometer w to left
or right in the range from 1 to 180 min. After the time set, the cooker automatically turns off.
After use, unplug the device.
AUTOMATIC TURN OFF AFTER POTS REMOVAL
Automatic turning off works when lifting or removing pots/pans from the heating plate,
After putting the pot/pan again on the heating plate within 40 seconds, the cooker starts
operating with the same previously set values. When the indicated time is longer, the cooker
automatically turns off.
CLEANING AND MAINTENANCE
Clean the device after each use. Disconnect the device and wait until it gets cooler. Do not use
petrol, thinners, brushes and paste to clean the device. Wipe the device with damp cloth with
some dishwash. Using the vacuum cleaner remove the dirt from the air ducts and the fan grid.
Clean the ceramic surface and the control panel with soft cloth and delicate means for cleaning
ceramic surfaces. Take care and prevent running water on the device (water may cause the
damage of the device). Never immerse the device and the power cord in water or other liquid.
MKE-08_instrukcja.indd 13 2012-03-20 14:52:11