MPM MMR-04Z User Manual

Page 13

Use OF THe MiXer

1. Mount beating mixer arms (5) or hook mixer arms (7) in right holes of the main unit (4)

until stop. Always insert accessories with the end with the crown on the left side of the

device.

2. Connect the mixer to the power.

3. Place the bowl (6) on the stand.

4. Open the support (9) by pressing the stand button (12). In extreme position the stand will

lock automatically.

5. Install the main unit with mounted beating mixer arms or hook mixer arms on the

support (9). Snap of fastenings indicates that the mixer has been mounted correctly.

6. Insert the protective cover (14) on the guide of the support (9).

7. Press the stand button (12) and lower the support (9).

8. Add products through the opening (15) in the protective cover (14). Then, close the

opening with plastic transparent lid.

9. Turn the mixer on by moving the button (1) from "0" to "5" position

10. The mixer is equipped with movable TURBO button (3) which allows to obtain

maximum power of the mixer.

11. During operation you can add products through the opening in the protective cover.

12. After finished work, move the button (1) to "0" position.

MMR-04 instrukcja.indd 13

2011-01-14 12:59:04