MotorVac CarClean System - Manual (Page 6)

Finish Up
Disconnect 12V DC power connector by pulling adapter out by the handle.
DO NOT PULL BY THE CORD!
Dispose of any remaining cleaning fluid in regular drain.
Drain machine by tilting it forward, NEVER BACKWARDS. (Photo H)
Replace dust covers and store for next use. Trace amounts of white dust may
be visible on the vehicle’s vents. This is normal and easily wipes off with a cloth.
Troubleshooting Guide
If you have an issue with the machine, there’s usually a quick and simple solution.
The MotorVac
® CarClean System
™
machine’s built-in diagnostic LEDs will help you
quickly figure out the problem and get your machine up and running.
First, make sure the machine:
• is connected to a proper 12V DC power source
• is placed on a level surface
• is filled with the proper amount of fluid
• has the exhaust dust cap removed
in progress completelow fluid
Diagnostic LEDs
H
5