Use with gps, 1 function, 2 gps information on the display – MIDLAND Neptune 100 User Manual

Page 16

ENGLISH

7. USE WITH GPS

7.1 Function

If connected to a GPS receiver (GR213), the transceiver will display the vessel position (latitude

and longitude), as well as time data.

If the information regarding position data are not received in the normal radio mode and the time

data does not appear within 4 hours, a 30-second-long warning tone will sound (can be deactivated

by pressing any button). The display will show “POSITION IS OVER 4 HOURS OLD”.

You may also insert the coordinates manually.

7.2 GPS information on the display

Once connected the GPS (GR213) to your

NEPTUNE 100 (PS 2 connector), the symbol [DISEGNO]

will blink on the display till your position will be established. Then, the radio display will show the

GPS coordinates and the time data.