MIDLAND BT Remote - Manual (Page 6)

6 - Midland BT Remote
UK
MIDLAND BT Remote
Advanced Remote Control System
Thank you for purchasing Midland BTRemote wireless remote control system for your Midland intercom.
Midland BTRemote can be fixed on the handlebar of your motorbike to control all the functions of your BTNext, BTX1 and BTX2 intercom devices.
Main features
› Adjustable fixing system
› 3 main function buttons + 2 for volume up and down
› MiniUSB plug for recharging
› Water resistant
Charging batteries
Make sure that the unit is fully charged before use. Charge the unit by inserting
the miniUSB cable in the charging plug (lift the rubber cover to insert the plug).
You can use any USB wall charger like the one in the BTNext, BTX1 or BTX2 box or
use the USB port of your PC. The red LED light will be on during all the charging
time. When the unit is fully charged, the red LED light will be off.
Please note: every time the mini USB recharging plug is inserted (or detached),
the device is automatically turned off. To use it while it is in charge, you should
turn the device on when the plug is already inserted.
Low battery indication
If the red LED is flashing and the unit is not plugged to a charger, it means the
battery is low. Please recharge the unit as soon as possible
Unit and fixing system description
BT Remote description
The BTRemote has five buttons on the front; the main three big buttons are multi
function buttons: the Forward (on the top), the Middle button and the Backward
(on the bottom). The two small rounded buttons on the top are the Volume +
and Volume -
Fixing system description
Midland BTRemote is very easy to fix, just open it and place it on the left handle.
Close it until is quite firm on the handle. To remove it just lift the lock point and
open it.
In the box you will find two extra rubber spacers to be replaced in case your
handle has a different size
LED Light
Volume up
Volume down
Forward
Middle
Backward
Interchangeable
rubber spacer