Mody Pumps M-800 SERIES - Manual (Page 2)

M-800 SERIES 25HP (19kW)
M-800 SERIES
MATERIALS OF CONSTRUCTION
AND ENGINEERING DATA
MOTOR
2-pole induction continuous rated motor with squirrel cage rotor.
Stator insulation class 'H' (180ºC)
Speed : 3400 RPM @ 60 Hz, 2800 RPM @ 50 Hz
Power Rating : 25HP @ 60 Hz, 19kW @ 50Hz Full Load
Current FLA: 34 Amps @ 460v. 39 Amps @ 400v.
Max. temperature of the pump liquid : 104°F/40°C
Max. start/stop per hour : 15
Star - Delta Starting Optional
POWER SUPPLY
3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency
combination.(208/220/230/380/415/460/575/1000V)
BALL BEARINGS
Single row deep groove upper bearing. Double angular contact lower bearings.
The bearings are enclosed with high temperature grease-containing special
Anti-corrosion additive.
POWER CABLE
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor
flexible cable, 50ft. (15m) length standard. Type SOOW in North America,
EPR in the Middle East and HO7RN in the EU.
SHAFT SEAL
Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten
Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.
CORROSION RESISTANT
Epoxy coated Steel Outer Casing
Epoxy coated Aluminum Stator Casing
Nitrile Rubber– Lined Diffuser/Wear plate.
Shaft: 431 Stainless Steel
Hardware: 304 Stainless Steel
Impeller: Nitride Hardened 410SS to 56HRC is Standard.
pH Range 5 - 8
STRAINER
304 Stainless Steel with 1-9/16” (25.5mm) X 3/8” (10mm) {M 802},
3/8” (10mm) Round Holes {M 806}
SUBMERGENCE
Submergence below liquid surface min 5” (127mm) max. 50’ (15m).
WEIGHTS
(Approx. without cable)
M 802: 410lbs. (186Kg)
M 806: 425lbs. (193Kg)
Due to continuous product development, specifications are subject to change without notice.
Vol. 11, Rev. 1, Jan. 2008
PERFORMANCE CURVES
MODEL: M802T/M806T (50/60 Hz)