Mody Pumps G 1006 T - Manual (Page 10)

14. FIT OUTER CASING ON TOP BRACKET WITH "O" RING. FIT DIFFUSER RING AND
DIFFUSER HOLDER AND TIGHTEN NUTS. FIT DIFFUSER CENTER AND ADJUST CLEARANCE
BETWEEN IMPELLER AND DIFFUSER CENTER TO THE MINIMUM BY USING TRIMMING WASHERS
(45). FIX STRAINER, BASE PLATE AND TIGHTEN BOLTS (38)
OIL SPECIFICATIONS
A). SHELL TELLUS 29.
B). EXXON UNIVOLT 61
C) CHEVRON SUPERLA FDA APPROVED # 10
USE NON-CONDUCTING, NON-FOAMING, NON-DETERGENT OIL ONLY
PARTS CATALOG
1. COMPONENTS LIST : AS PER DRAWING NO. DW/885/00 (SHEET 1 & 2)
DRAWINGS :
1. SECTIONAL ASSEMBLY (DW/885/00)(SHEET 1 & 2)
2. MATERIAL PARTS LIST
R: RECOMMENDED SPARES FOR TWO YEARS OPERATION
SR. NO. DESCRIPTION PART NO. RECOMMENDED QTY.
1. MECHANICAL SEAL
535-026-00 2 NOS.
2. "O" RING SET 375-016-66 2 SETS.
3. CABLE GROMMET 260-023-66 2 NOS.
4. CABLE LEAD GROMMET 260-024-66 2 NOS.
5. UPPER BEARING 020-011-07 1 NOS.
6. LOWER BEARING 020-019-07 1 SET.
7A. IMPELLER (60HZ) 300-108-22 1 NOS.
7B. IMPELLER (50HZ) 300-098-22 1 NOS.
8. DIFFUSER CENTER
155-009-80 1 NOS.
9. DIFFUSER RING 170-006-80 1 NOS.
10. WEAR PLATE 715-012-80 1 NOS.
11. LOCK WASHER 695-012-21 2 NOS.
PLEASE CHOOSE IMPELLER ACCORDING TO FREQUENCY.