Mirion Technologies R93 MK3 User Manual

Page 4

SPECIFICATION AND PERFORMANCE: OPTICS

Non-browning 9mm D mount auto iris lens fitted as standard. Optional non-browning 6mm and 25mm D mount
lenses and C mount lenses available.

Viewing angles in air (typical)

Horizontal

Vertical

Diagonal

Focus Range

Standard 9mm lens

50°

39°

61°

30mm to infinity

Optional 6mm lens

73°

58°

85°

5mm to infinity

Optional 25mm lens

20°

15°

25°

170mm to infinity

315 Daniel Zenker Drive
200 IST Center
Horseheads, NY 14845
USA
T +1.607.562.4369
+1.800.432.1478
F +1.607.562.4392

2 Columbus Drive
Southwood Business Park
Farnborough, Hampshire
GU14 0NZ, UK
T +44 (0) 1252 375137
F +44 (0) 1252 391890

Kaiser-Konrad-Str 93a
D 53225 Bonn
Deutschland
T +49.(0).228.625.088
F +49 (0) 228.626.300

Route d’Eyguières
BP n°1
FR - 13113 Lamanon
France
T +33 (0) 4 90 59 59 59
F +33 (0) 4 90 59 55 18

www.mirion.com

SPECIFICATION NOTES

1. A “good” picture is defined as one where the illumination

available is sufficient for the camera to produce a 1 volt
composite video signal with a fully open iris.

2. A “usable” picture can usually be obtained dependent on

the scene viewed and environmental factors etc, when the
illumination available is only 1/3 that required to achieve a
1 volt composite video signal with a fully open iris.

3. Mirion should be consulted with regard to very critical viewing

requirements, or in cases where there are important lighting,
resolution, environmental or viewing angle considerations.

4. In applications where there are severe space constraints care
should be taken to allow for the size of the camera cable
mating connector and, if necessary, the bend radius of the
connecting camera cable. Please refer to the IST-Rees R90 series
cables and connectors data sheet.

The above specifications may vary according to system configuration.
Mirion Technologies Incorporated reserves the right to amend or change the information on
this sheet without prior warning.
05/12