Mirion Technologies Ist-rees R93 Viewing Attachments - Manual

Features
• Radiation tolerant
• Wide angle option
• Lighting facilities
• C-Mount lens option
• Interchangeable on R93 capsule
• Underwater use via water corrected windows
Ist-rees r93
Interchangeable Lens Bodies
The IST-Rees R93 cameras can be fitted with a range
of interchangeable lens bodies which include zoom and
wide angle types.
The interchangeable lens bodies provide different lens
facilities for the standard R93 Camera. This allows the
standard R93 Capsule to be used in many varied appli-
cations. All the control and power supplies are fed to the
camera through the single camera cable.
Fitting an interchangeable lens body is very simple. Un-
screw the camera rear locking ring, remove the existing
body and the new body can be fitted over the camera
capsule and dual ‘O’ rings. Once the locking ring is tight-
ened the camera is waterproof and ready to use.
Plain or water corrected windows are supplied depend-
ing upon the application. Plain windows used underwa-
ter narrow the viewing angle. When a water corrected
window is used, the angle of view is the same as a plain
window used in air.
The R93/75L bodies are provided with standard lighting
systems. High power lighting requires the heat gener-
ated by the lights to be dissipated quickly. Underwater
environments do this, but in air, lower power should be
used; some lighting systems are not rated for continuous
operation in air.
imaging systems
a Mirion technologies Division
Featuring: