Meriam M2110 Series Smart Gauge - Manual

Pressure Accuracy
Accuracy: + 0.05% FS. No temperature
effect from -4
o to 122 o F (-20 o to +50 o C).
Engineering Units
M2110P (Pressure)
mmHg, PSI, in Hg, mbar, Bar, kPA,
Inches H2O (Select 20
o C, 4 o C or 60 o F),
Kg/cm2, cmH20 and user defi ned.
M2110F (Flow) & M2110L (Level)
gallons, pounds, cubic feet, liters, per-
cent, kilograms, cubic meters, Inches
H2O and user defi ned.
Damping Rates
Exponential damping with user
selectable time constant from 0.1 to 50
seconds.
Media Compatibility
DN: Non-isolated differential sensor for
clean, dry, non-corrosive gases.
DI: Isolated differential sensor for fl uids
compatible with 316L SS and Viton.
GI, CI or AI: Isolated gauge or absolute
sensor for fl uids compatible with 316L
SS.
Pressure Limits
DN: 2x F.S. when pressurized on high
side only and 150 PSI static when
applied to both sides simultaneously.
DI: 3x F.S. (P1-Hi) on Differential units -
1000 PSI static.
DI: 3x F.S. (P2-Lo) or 150 PSI, whichever
is less.
GI, CI and AI: 2x F.S.
Selectable Timeout
(Battery Models)
User selectable shut-off. Programmable
at 1, 2, 5, 10, 15, 25 minutes.
Lockout
Two digit code to prevent inadvertent
resetting of confi gurations.
Adjustable Deadband
(SPDT Relay Models)
Value can be set to 0, 0.1, 0.2, 0.5, 1, 2,
5 and 10% of F.S.
M2110 Series Smart Gauge
Pressure, Flow or Level Versions
Meriam’s M2110 Series Smart Gauge is back by popular
demand! It features Meriam’s new Embedded Pressure
Instrument (EPI) for the latest technology while retaining the
same enclosure and user interface as the original design. The
large display, fl exible mounting (Panel, Pipe or Bench top) and
power options (24 VDC, Battery or AC) make it the ideal gauge
for almost any application. The M2110 features NIST traceable
accuracy of +0.05% F.S., independent of temperature effect, at a
very reasonable price.
Pressure ranges are now available to measure differential,
gauge, compound gauge and absolute for a variety of gases
and liquids. The display can be read out in any of the selectable
engineering units or be scaled for fl ow rate or tank level
depending on model selected.
An adjustable damping feature minimizes the effects of pulsating
pressures. SPDT relays on AC powered units or the 4-20mA
output on 24VDC units make the M2110 an ideal choice for
many control and recording functions. Both models also include
RS232C communications for additional control and data logging
capabilities.
Meriam Process Technologies 10920 Madison Avenue, Cleveland, OH 44102
Main Line: 216.281.1100 • Fax: 216.281.0228 • www.meriam.com • Email: [email protected]
M2110P
Shown
Back of
M2110P