Avid Technology DIGI 1 - Manual (Page 71)

Chapter 6: Recording 67
Mic/Line High-Pass Filter
Digi 001 includes a high-pass filter set at 60 Hz. This filter can be useful for filtering out
low-end rumble from a noisy recording environment or microphone handling, or AC
noise.
To use the high-pass filter on analog input 1 or 2:
1 Choose Setups > Hardware, then click Other Options.
2 Enable the high-pass filter for the required inputs.
Recording an Audio Track
To record a track:
1 Record enable the desired track and assign an input to it. Set the input levels
appropriately.
2 Display the Transport window (Windows > Show Transport) and click Return to Zero to
ensure that you are starting from the beginning of the session. You can also record
according to a selection or from the cursor location in the Edit window.
3 Click Record in the Transport window to enable recording.
4 Click Play or press the Spacebar to record on all record-enabled tracks.
5 Click Stop in the Transport window or press the Spacebar when you are done recording.
Recording from the beginning of a session
click to enable recording
(turns bright red)
Return to Zero
click to record from the
beginning of session
click Play to start recording