Controls and functions cont’d – Lectrosonics FM870 User Manual
Page 5
CONTROLS AND FUNCTIONS cont’d
WIRELESS MIC
VOLUME:
This control adjusts the volume of the built-in wireless microphone system. This
knob does not affect the MODULATION LEDs located near it.
AUX MIC/HI LEVEL
VOLUME:
This control adjusts the volume of the AUX MIC INPUT and the HI LEVEL IN
inputs.
AUX MIC INPUT:
This jack is a standard 1/4" phone jack and will accept a high impedance dynamic
microphone. It is recommended that you use the LECTROSONICS RM-121S
microphone with an MC-16C or MM-16 cord.
HI LEVEL OUT:
An RCA phono jack that provides a one Volt output signal to drive line level inputs
of tape decks, cassette players and other P.A. systems.
HI LEVEL IN:
An RCA phono jack input used for playback of line level outputs from tape decks,
cassette players and other P.A. systems.
MIC LEVEL OUTPUT:
A 3-pin XLR audio connector which provides a balanced, low impedance (200
Ohm), 10 millivolt, microphone level output suitable for microphone mixers and
other units requiring a microphone level input. This balanced output also
provides the means to connect to the house sound system.
4