Lectrosonics Pro 4 Mini - Manual (Page 8)

SPECIFICATIONS
CDM4 RF/POWER DISTRIBUTION MODULE
RF Gain:
RF Output:
Filtering:
Third Order Intercept:
Power Input:
Power Consumption:
Connectors:
Short Circuit Protection:
PRO4 MINI SYSTEM
Construction:
Dimensions:
Weight:
Batteries:
Operating Time per Charge:
1.5 dB
Four outputs, 50 Ohm, BNC
Two section helical resonator
+25 dBm
12 to 20 Vdc (either polarity)
Pins 1 and 4 on XLR power jack
CH-50 adapter for AC operation
14 to 20 Vac, 50/60 Hz, 1/2 Amp
Pins 2 and 3 on XLR power jack
16 to 22 Vdc 1/2 Amp
45 mA (plus 55 mA for each CR185 receiver)
Total 265 mA
RF: BNC
POWER INPUT: 4 pin XLR (Switchcraft D4M)
POWER OUTPUT: 2.5mm power jack
A/D Electronics part # ADC-014
Auto-reset thermal fuses (6)
Machined aluminum panels, housings, and
mechanical parts.
6 x 8 x 9 inches (in carrying case)
14.25 lbs including 4 CR185 receivers
Two 6V, 4.8 Ah rechargeable gel-cells
Panasonic LCR-456-P
14.5 Hours
7