Acer AT3202 - Manual (Page 22)

English
22
• Press the PIP/PBP/POP button once to display activate picture-in-
picture (PIP).
• Press twice to activate picture-by-picture (PBP).
• Press three times to activate picture-on-picture (POP).Then, the
POP screens will display the TV channel programmes one by
one.
PIP
1a. Press the ACTIVE key to toggle between PIP screens.
1b. Press the TV, AV, SCART or PC keys, number keys or CH up or
down to change the content of the active screen.
2. Press the SWAP key to change the content between the
primary and the subscreen.
PIP PIP Swap
3. Press the POSITION key to select the location of the
subscreens, from upper left -> upper right -> lower right ->
lower left, as shown in the image.
PIP PIP
PIP PIP
4. Press the SIZE/MODE key to select the size of the subscreen,
from 25% -> 37.5% -> 50%, as shown in the image.
PIP
PIP/PBP/POP
Advanced features
PBP (Picture-by-Picture) PIP (Picture-in-Picture)
PIP
PBP
POP (Picture-on-Picture)
POP POP POP
POP
POP
1. For a list of the available sources for this feature, please refer to the appendix at the end of this manual.
7in1_User Guide_EU.indb 22 2006/1/24 ¤U¤И 05:30:48