Asus P2B-VM - Manual (Page 70)

70 ASUS P2B-VM User’s Manual
Advanced Setup (optional)
If you wish to fine tune its settings for your monitor and system type, select Ad-
vanced Setup from the Main Menu. On-screen context sensitive help is displayed as
you highlight each Advanced Menu item.
WARNING! The Advanced Configuration option allows you to use certain fea-
tures that may add additional performance to your device. However these op-
tions may not be compatible with your system. If problems appear after an ad-
vanced option is changed, returning the device to factory defaults will rectify the
situation.
Factory Defaults
The device can be reset to factory defaults by pressing +.
Saving Your Configuration
Once you have finished configuring the necessary parameters described above, save
them by pressing .
Diagnostics
All installed graphics modes for your video device can be viewed and tested, by run-
ning the INSTALL program from the DOS prompt, or by running a diagnostics pro-
gram called M64DIAG.EXE. Do not run it in a windowed or full-screen DOS box. In
the INSTALL program, select Test Graphics Adapter from the Diagnostics... option of
the Main Menu. The Test Graphics Adapter menu has the following options:
• VGA Tests ...
• Accelerator Tests ...
Any time you suspect there is a problem, especially during installation, run the above
tests. The information provided in this appendix will enable you to solve most problems.
B. Other Video Drivers
B
. Other V
ideo Drivers
Adv
. / Diagnostics