beautypg.com

Management setting, Eng lis h – Acer H5350 User Manual

Page 31

background image

19

Eng

lis

h

Management setting

ECO Mode

Choose "On" to dim the projector lamp which will lower power

consumption, extend the lamp life and reduce noise. Choose "Off"

to return normal mode.

Auto Shutdown

The projector will automatically shutdown when there is no signal

input after the allocated time. (in minutes)

Source Lock

When source lock is turned "off", the projector will search for

other signals if the current input signal is lost. When source lock is

turned "on", it will "lock" the current source channel unless you

press "Source" button on the remote control for the next channel.

Menu Location

Choose the menu location on the display screen.

Lamp Hour Elapse

Displays the lamp’s elapsed operating time (in hours).

Lamp Reminding

Activate this function to display a reminder to change the lamp 30

hours before its expected end-of-life.

Lamp Hour Reset

Press the

button after choosing "Yes" to turn the lamp hour

counter to 0 hours.

Security

Security

This projector provides a useful security function for the

administrator to manage usage of the projector .
Press

to change the "Security" setting. If the security function

is enabled, your must enter the "Administrator Password" first

before changing the security settings.

Select "On" to enable the security function. The user has to
enter a password to operate the projector. Please refer to the

"User Password" section for details.

If "Off" is selected, then the user can turn on the projector
without password.

Timeout(Min.)
Once "Security" is activated to "On", the administrator can set

timeout function.

Press

or

to select the timeout interval.

The range is from 10 minute to 990 minutes.

When the time is up, the projector will prompt the user to
enter the password again.

The factory default setting of "Timeout(Min.)" is "Off".

Once the security function is enabled, the projector will
request user to enter password when switch on the projector .

Both "User Password" and "Administrator Password" can be

accepted for this dialogue.