4 do not disturb schedule (dnd) – Controlled Products Systems Group 1812-090 User Manual
Page 42
1812-162-G-12-10
40
2.7.4 Do Not Disturb Schedule
(DND)
Default setting in step 2 is 0 (DND Off).
The Do Not Disturb (DND) feature allows the resident to program a schedule when they do not want the 1812 to ring the
house phones or to call forward when the call button on the unit is pressed. For example, a resident may program a do not
disturb schedule from 10 PM to 7 AM on certain days of the week, or all seven days.
Only one DND schedule can be
programmed.
Once the DND schedule has been programmed, it can be turned ON or OFF as needed.
1. Press
*
3 4 and enter the MASTER CODE. [
*
3 4 _ _ _ _ (beep)]
2. Press 0
*
to turn DND OFF, OR press 1
*
to turn DND ON. [ _
*
(beep)]
You can terminate here (Go to step 8 to finish) if you have previously programmed the DND schedule
and only ON / OFF is desired.
3. Enter the beginning hour (01 to 12) and minutes (01 to 59), then press
*
. [ _ _ _ _
*
(beep)]
4. Press 0
*
for AM OR press 1
*
for PM. [ _
*
(beep)]
5. Enter the ending hour (01 to 12) and minutes (01 to 59), then press
*
. [ _ _ _ _
*
(beep)]
6. Press 0
*
for AM OR press 1
*
for PM. [ _
*
(beep)]
7. Enter the days of the week that the DND is to be active, then press
*
.
[ _ _ _ _ _ _ _
*
(beep)]
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
You can enter up to 7 numbers here (1-7) but all 7 spaces do not have to be populated with numbers.
For example, for the DND to be active only on Saturdays and Sundays, enter 1 7
*
. The order of the
numbers is not important; 17 is the same as 71.
8. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
2.7.3 Call Forward - ON/OFF or Timed Schedule Activation
This programming sequence turns the call forward feature
ON/OFF or setup a timed schedule activation. You must have a
call forwarding phone number programmed into the 1812 memory (See 2.7.2).
1. Press
*
3 7 and enter the MASTER CODE. [
*
3 7 _ _ _ _ (beep)]
2. Press 0
*
to turn call forwarding OFF, OR press 1
*
to always call forward, OR press 0
*
to call
forward per the call forward
timed
schedule. [ _
*
(beep)]
You can terminate here (Go to step 8 to finish) if you have previously programmed the
timed
schedule
and only ON / OFF or Call Forward per the
timed
schedule is desired.
3. Enter the beginning hour (01 to 12) and minutes (01 to 59), then press
*
. [ _ _ _ _
*
(beep)]
4. Press 0
*
for AM OR press 1
*
for PM. [ _
*
(beep)]
5. Enter the ending hour (01 to 12) and minutes (01 to 59), then press
*
. [ _ _ _ _
*
(beep)]
6. Press 0
*
for AM OR press 1
*
for PM. [ _
*
(beep)]
7. Enter the days of the week that the call forward time zone is to be active, then press
*
.
[ _ _ _ _ _ _ _
*
(beep)]
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
You can enter up to 7 numbers here (1-7) but all 7 spaces do not have to be populated with numbers.
For example, for the call forwarding to be active only on Saturdays and Sundays, enter 1 7
*
.
The order of the numbers is not important; 17 is the same as 71.
8. Press 0 # TOGETHER to end. [0 # (beeeeeep)]