Comprehensive CSW-VGA440A - Manual (Page 5)

VGA SWITCH SPLITTER 4×4 （matrix）
４
will appear.
The input instruction should be right, or you will be rejected with the “ wrong
instruction ”
If the input or output that you chose is not connected to devices or not in
power-on mode, “ ineffective instruction ” will inform you.
If your instruction is performed, you can see the instruction of “ successful
operation ”.
③. Instruction input method
A. Selecting source device
Sequence number of output (A/B/C/D) + sequence number of the input
(1/2/3/4) +
“Enter”
For example: If you want display B to view source 3, then you can input
“B3
“and finish with “Enter”.
B. Turning off an output
C + Sequence number of the output that you want to turn off (A/B/C/D) +
“Enter”
For example: If you want to turn off output B, then you can input CB, and
finish with
“Enter”.
C. Turning off the Switch Splitter:
OFF +
“Enter”
D. Turning on the Switch Splitter:
ON +
“Enter”
E. Inquiry:
QS +
“Enter”
This order enables you know which input and output are available and the
connections of input and output.
5.3 CONECTION DIAGRAM