Comprehensive CSW-VGA211 User Manual
Page 10
8
5.3.1
Connecting the REMOTE Connector when IN 2 is the DEFAULT
By default
1
the
CSW-VGA211 automatically detects an active source signal
from VGA IN 1, and the order of the REMOTE input connectors is as printed:
Figure 5: Connecting the REMOTE Connector when IN 1 is the DEFAULT
If you change the default
2
so that the
CSW-VGA211 automatically detects an
active source signal from VGA IN 2, the order of the REMOTE input
connectors automatically changes (IN 1 acts as IN 2, and IN 2 acts as IN 1):
Figure 6: Connecting the REMOTE Connector when IN 2 is the DEFAULT
1 The pair of DEFAULT SELECT switches are set to IN 1
2 By setting the pair of DEFAULT SELECT switches to IN 2