Aiwa CT-Z110 - Manual (Page 13)

CTZ110(YU)-total-En-13
SETTING THE BEEP TONE
The unit is preset at the factory to beep each time
you press any button on the front panel except
z ,
REW, or FF (no beep with the Jog Dial). You can
mute this beeping by following the procedure
below.
1
With the unit off, press and hold SEL for
more than 2 seconds.
The “BEEP” indication appears.
2
Rotate the Jog Dial to select on or off.
The beep function is activated when the
“BEEP” indication appears with the beep on/
off indicator lit, and canceled when not
displayed.
Beep on/off indicator
3
Press and hold SEL for more than 2
seconds.
The unit turns off.
ENGLISH
12
MAINTENANCE
Cleaning the front panel
When the front panel is soiled, wipe the surface
with a soft, dry cloth.
Cleaning the tape head
Use a cleaning cassette to clean the playback
head and capstans approximately once a month.
If the head is dirty, the high tones may not be
reproduced properly.