INTELLINET NETWORK NSC15-WG Quick Install Guide User Manual
Page 4
- 4 -
2. IP Installer for Windows
This utility is designed to find the network camera on your network and lets
you make changes to the configuration.
Click on “Yes” to begin the installation.
When the program starts, you are presented with the screen shown above.
The IP Installer utility lists all cameras that can be found on your network.
With this utility you can make changes to the configuration, perform a
firmware upgrade, restore the camera to factory default values, and reboot
the camera. Note: It may take up to three minutes for IP Installer to show
a camera that has been recently (re-)started.
Refer to the user manual for more detailed instructions on the camera
setup.
3. Video Surveillance Software
Refer to user manual on the CD for the 16-channel NVR (network video
recorder).
MacOS
The installation on Apple systems running MacOS X does not involve the
INTELLINET installation CD. The INTELLINET NETWORK SOLUTIONS network
camera supports Apple’s Bonjour service.