INSTEON Waterproof Temperature Sensor for INSTEON Wireless Thermostat (2433A3) - Manual (Page 2)

10
INSTEON Limited Warranty
Seller warrants to the original consumer purchaser of this product that, for a period of two years
from the date of purchase, this product will be free from defects in material and workmanship and
will perform in substantial conformity to the description of the product in this Owner Manual. This
warranty shall not apply to defects or errors caused by misuse or neglect. If the product is found
to be defective in material or workmanship, or if the product does not perform as warranted above
during the warranty period, Seller will either repair it, replace it, or refund the purchase price, at its
option, upon receipt of the product at the address below, postage prepaid, with proof of the date
of purchase and an explanation of the defect or error. The repair, replacement, or refund that is
provided for above shall be the full extent of Seller liability with respect to this product. For repair
or replacement during the warranty period, call the INSTEON Support Line at 800-762-7845 with
the Model # and Revision # of the device to receive an RMA# and send the product, along with all
other required materials to:
INSTEON - ATTN: Receiving Dept.
16542 Millikan Ave., Irvine, CA 92606-5027
The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written,
express or implied, including any warranty or merchantability or fitness for a particular purpose.
Any implied warranty, including any warranty of merchantability or fitness for a particular purpose,
which may not be disclaimed or supplanted as provided above shall be limited to the two-year of
the express warranty above. No other representation or claim of any nature by any person shall be
binding upon Seller or modify the terms of the above warranty and disclaimer. Home automation
devices have the risk of failure to operate, incorrect operation, or electrical or mechanical
tampering. For optimal use, manually verify the device state. Any home automation device should
be viewed as a convenience, but not as a sole method for controlling your home.
In no event shall Seller be liable for special, incidental, consequential, or other damages resulting
from possession or use of this device, including without limitation damage to property and, to the
extent permitted by law, personal injury, even if Seller knew or should have known of the possibility
of such damages. Some states do not allow limitations on how long an implied warranty lasts and/
or the exclusion or limitation of damages, in which case the above limitations and/or exclusions
may not apply to you. You may also have other legal rights that may vary from state to state.
Protected under U.S. and foreign patents (see www.insteon.com)
© Copyright 2012 INSTEON, 16542 Millikan Ave., Irvine, CA 92606
800-762-7845, www.insteon.com
External Sensor Setup
1. Install Waterproof Temperature
Sensor.
2. Press and hold Wireless
Thermostat Program button to
enter User Setup.
3. Press Mode to step through to
Sub Mode 05.
4. Press Up/Down buttons until
display shows “E” (external).
5. Press and hold Program to exit.
Troubleshooting
• If the display reads “IEE,”
Wireless Thermostat is not
detecting the sensor. Repeat
Specifications
6
Product name Waterproof Temperature Sensor
Product number 2433A3
UPC 813922010800
Warranty 2 years, limited
Cable length 6’ (1.8m)
Color White
Operating environment Indoors/outdoors
Operating temperature range -13° to 185°F (-25° to 85°C)
Operating humidity range 0-100% relative humidity
Sensor detection range Up to 100’ with 22 AWG wire
Waterproof Yes
Waterproof Temperature Sensor’s
readings will appear in small
digits in top right of Wireless
Thermostat’s LCD display.
NOTE: we recommend using
a drip loop to protect Wireless
Thermostat’s electrical outlet.
7 8
11 9
external sensor setup steps or
remove and replace thermostat
batteries.
• If the temperature display is
inaccurate or not updating:
• Wireless Thermostat activates
once per minute to update the
displayed temperature.
• Pressing any button on Wireless
Thermostat will automatically
update the temperature display.