ATON Room Speaker Level Audio Router DLA4 - Manual (Page 2)

DLA4 FEATURES
DLA4 SPECIFICATIONS
Master Bedroom Office Kitchen Pool
DLA4
Receiver
Receiver audio can be routed to four additional areas.
Category DLA4
Frequency Response 20 Hz to 20 kHz
Power Handling (RMS) per channel 125 W
Max Attenuation -56 dB at last step
Dynamic Range 43 dB over 12 steps
THD (Total Harmonic Distortion) <1%
Amplifier Impedance 4-8 Ohms
Speaker Impedance 4-8 Ohms
Dimensions 2-3/8" H x 17" W x 8-5/8" D
Dimensions Without Feet 1-3/4" H x 17" W x 8-5/8" D
Weight 11 lbs.
Rack Mount Ears Model: REKT (Sold Separately)
DLA4 APPLICATION*
*Also available in 2 and 6 room configurations
DLA (Dynamic Level Adjustment) Technology delivers maximum
available volume levels to each room while protecting your
amplifier from damage (patent pending)
Advanced Control Options (sold separately)
-
ATON RF Remote (Up to 200 ft. Range)
-
ATON IR Receivers
-
ATON In-Wall Touch Pad
Adds up to 4 pairs of speakers to your home theater/stereo
receiver or amplifier
Expands Multi-Zone audio system capabilities with additional
speaker and control locations (sub-zones)
Programmable "Scene" command for one-touch recall of your
favorite system settings
One-touch "All On" command turns audio on in all rooms
One-touch "All Off" command turns audio off in all rooms
Room labels with adhesive backing included for easy front panel
room identification
2 Year Limited Warranty
Slimline Infrared (IR) Remote Included
Technology in reach. ™ ©2007 ATON. All rights reserved. • 1300 New Circle Road, Suite 150 • Lexington, KY 40505 • www.atonhome.com