Airlink101 AGIGAUSB User Manual

Page 3

Text mode
Original mode

Section 3

Step 8

Connect one end of the Gigabit Network Adapter to your computer’s USB

port and connect the other end to a hub/switch/router.

Step 9

At the Found New Hardware Wizard window, select No, not this time

and click Next.

Step 10

Select Install the software automatically (Recommended) and click

Next.

For Windows 2000, select Search for a suitable driver for my device
(Recommended) and click Next. Then check on the CD-ROM drives check box
and click Next.

Step 11

Click Continue Anyway at the Windows Logo Testing prompt.

(For Windows 2000, click Yes at the Digital Signature Not Found prompt).

Step 12

Click Finish to complete the installation.

Step 13

Restart your computer to activate the Gigabit Network Adapter.