Hydrotech Precision-PWS 8-5 OWNERS GUIDE - Manual (Page 26)

26
1. To remove the storage tank lid, turn the Lid Knob counter-clockwise while
lifting. Lifting while turning holds the Tee Bar bracket under the lid and
allows you to loosen the lid. Continue turning and lifting until there is ½” of
space between the Tee Bar bracket and the lid.
2. Tip the lid so that the Tee Bar bracket slips out from under the rim of the
storage tank opening on one side, and then slide the lid so the Tee Bar
bracket slips out from under the other side of the rim.
3. To replace the storage tank lid, tip the lid so that the Tee Bar bracket slips
under the rim of the storage tank opening on one side, and then slide the
lid so the Tee Bar bracket slips under the other side of the rim. Center the
lid.
4. While lifting up on the storage tank lid knob, turn clockwise to tighten the
lid onto the storage tank. Tighten until snug only.
Storage Tank Lid Removal and Installation