Hydrotech EBP75TFC-3SF Replacing the Auto Shutoff With a Solenoid Valve on Economy Reverse Osmosis C_W Booster Pump - Manual (Page 2)

4. Remove the white tubing from the Auto Shut off as shown below. This tubing is the other end of the tubing removed
from the RO membrane housing. Pull this white tubing out from the RO bracket/module and save it for future use for
this installation.
5. Remove the other three white tubings from the auto shut off valve and discard the auto shut off valve.
Below is what the RO would look like at this step.
6. Remove and discard the small white tube from the high pressure switch.
Auto Shutoff
Valve
This is the same tube.
Disconnect Tubing Pull this tubing out from the module.
Auto Shutoff Valve
White Tubing #3 White Tubing #2 White Tubing #1