Hydra-Flex Aqua-Lab MD - Manual (Page 4)

680 East Travelers Trail • Burnsville, MN 55337
T: 952-808 3640 • F: 952-808-3650
www.hydraflexinc.com
[email protected]
680 East Travelers Trail • Burnsville, MN 55337
T: 952-808 3640 • F: 952-808-3650
AQUA-LAB MD SERIES
MICRO-DOSE CHEMICAL DISPENSING SYSTEMS
3000780 revB0413
SOLENOID VALVES
24 VAC or 24 VDC or 120 VAC
15 Watts Per Port
PUMPS
7 GPM 10 GPM 20 GPM
115V/1PH/18A
or
230V/1PH/9A
208-230V/3PH/6A
or
460V/3PH/3A
208-230V/3PH/8.9A
or
460V/3PH/4.1A
POWER REQUIREMENTS
MOTOR CONTROL
UNIT
14” x 15”
PANELS
MD1 MD3 MD5
17” x 22” 22” x 29” 22” x 29”
PUMP ASSEMBLIES
1-Pump 2-Pump 3-Pump
24”x 48” 24” x 48” 36” x 48”
DIMENSIONS (W x H)
Water Filtration (Suggested) 50 Micron
Maximum Water Source Temperature 140˚F
Operating Water Pressure 200 PSI (Factory Set)
Solution Outlet Lines Up to 3 GPM 3-6 GPM
3 ⁄
8
” Polyflow 1 ⁄
2
” ID Min.
Water Inlet Lines 7 GPM 10 GPM 20 GPM 40 GPM
1 ⁄
2
” ID 3 ⁄
4
” ID 1” ID 1 1 ⁄
2
” ID
WATER SUPPLY
Air Outlet Line 3/8” Polyflow Per Application
Air Inlet Pressure 60-120 PSI Dry Air
Air Inlet Line 3/8” Polyflow Per MD Panel
AIR SUPPLY