Hudson Valley Lighting WINSLOW 3820-3827 User Manual
Page 2
Hudson Valley Lighting, Inc.
P.O. Box 7459
106 Pierces Road
Newburgh, NY 12550
(800) 814-3993
3820, 3825 & 3827
(Continued)
NEVER FASTEN THE GROUND WIRE TO THE BLACK OR “HOT” WIRE!
FAILURE TO FOLLOW THIS INSTRUCTION COULD RESULT IN SERIOUS
INJURY OR DEATH!
6. Fasten the white fixture wire to the white wire in the outlet box. Fasten the wires
to together with an approved fastener (wire nut).
Starting about 1” below the fastener, tightly wrap connection with electrical tape so
that the tape seals the end of the fastener.
Make sure that there is no exposed wire or strands that could cause a dangerous
short circuit !
7. Connect the black fixture wires to the black wire in the outlet box.
Fasten the joined wires as in step 6.
8.Using the ball nuts fasten the canopy to the outlet box. Loosen, rotate and align
the crossbar and canopy as necessary.
9. Twist the socket holder into the stem.
10. Remove the socket ring from the threaded socket holder and fasten it with
the socket ring.
10. Install the lamp(s) light bulb(s).
NOTE: 3820 is rated for 100 watt type A lamp
3825 is rated for 100 watt type A lamp.
3827 is rated for 150 watt type A lamp.
DO NOT EXCEED RECOMMENDED WATTAGE !
12. Place the glass into metal shade ring and twist it onto the metal shade ring.
13. Restore power to circuit at breaker or fuse box.
Approved fastener
(Wire nut)
Electrical tape