Hudson Valley Lighting VENTURA 1224-1248 User Manual
Page 2
7. Connect the black fixture wires to the black wire
in the outlet box. Fasten the joined wires as in step 6.
8. Place the cover plate over the mounting plates.
Place the fixture over the mounting plates.
Fasten the fixture in place with the 4 end balls removed in step 1.
9. Install the lamp.
Place the 2 pins on each end of the lamp in the slots in the lamp holders.
Turn the lamp 1/4 turn to lock the lamp in place.
NOTE: The lamp type is T-5
The 1224 uses a 14 watt lamp. The 1236 uses a 21 watt lamp. The 2148 uses a 28 watt lamp.
10. Position the end of the diffuser in the end holder.
Push the end of the diffuser against the spring-loaded "C" plate.
Push the "C" plate in far enough to allow the opposite end of the diffuser to be inserted into the other end holder.
11. Restore power to circuit at breaker or fuse box.
101706
Lamp holder
Diffuser
Lamp
"C" plate
- ABERDEEN 629 (2 pages)
- ABERDEEN 622 (2 pages)
- ABINGTON 4902 (1 page)
- ADAMS 992 (1 page)
- ADJUSTABLES 9341 (1 page)
- ADJUSTABLES 341 (3 pages)
- ALBA L248 (1 page)
- ALBA L246 (1 page)
- ALDEN 962 (1 page)
- ALFORD 810 (1 page)
- ALPINE 7118 (2 pages)
- ALPINE 7112 (1 page)
- ALPINE 7102 (1 page)
- ALTAMONT 5618 (1 page)
- ALTAMONT 5519 (1 page)
- ALTAMONT 5508 (1 page)
- AMELIA 8994 (1 page)
- AMELIA 8991 (1 page)
- AMENIA 1034 (1 page)
- AMENIA 1032 (1 page)
- AMHERST 8518 (1 page)
- AMHERST 8512 (1 page)
- ANDOVER 7424 (1 page)
- ANDOVER 7414 (1 page)
- ARDSLEY L595 (1 page)
- ARLINGTON 382 (1 page)
- ASHLAND 6216 (1 page)
- ASHLEY 319 (1 page)
- ASHLEY 312 (1 page)
- ASTON L267 (1 page)
- AUBURN 1352 (1 page)
- AUBURN 1351 (1 page)
- AURORA 282 (1 page)
- OAKDALE 330 (1 page)
- AVALON 6212 (1 page)
- BALDWIN 729 (1 page)
- BALDWIN 722 (1 page)
- BARKER 472 (1 page)
- BARRINGTON 327 (2 pages)
- BARTON 3212 (1 page)
- BASKING RIDGE 6118 (2 pages)
- BASKING RIDGE 6113 (4 pages)
- BASKING RIDGE 6101-6104 (2 pages)
- BEACON 4228 (2 pages)
- BEACON 4222 (2 pages)