3 system information and, Channel selection, 1 system information – Approach Tech DVR-3024 User Manual
Page 14: 2 channel selection, 3 system information and channel selection

12
CH1
CH2
CH3
CH4
01/01/2005 12:00:00
2.3 System Information and
Channel Selection
2.3.1 System information
You can display system settings information as
shown in FIGURE 3.3 A below at any time by
pressing the Display button
8
. In the
playback mode, the recorded video information
is displayed. In the live or recording mode, the
Manual Recording information is displayed.
Each sequential press of the Display button
displays a different message detailed in the
following example. By default, the unit displays
time, date, and an indicating bar of capacity
status on a monitor as shown.
Default Display
CH1, CH2, CH3, CH4 are titles for the
corresponding channels, changeable in the
setup menu.
Capacity Status:
(Capacity Used) (Capacity Remaining)
01- 01-2005 12:00:00
(Date)
(Time)
Press the Display button
8
once; the DVR
will display the following sample message plus
the default display. Press the Display button
8
again; the unit will not display any OSD
message. Press the button one more time to
go back to the default display
.
FIGURE 3.3 A
(1+2: 59G): Total capacity of installed hard disk, 59
GB
.
(12.4 HR): Total 12.4 hour recording time available
.
(
): Timer record activated
.
(
): Alarm record activated
.
(QUALITY: BEST): Record quality setting, BEST
.
(NTSC ): NTSC system
.
(RATE: 6 HR): Setting of Record time mode, 6 hours
.
(20 F/S): Record speed setting, 20 fields/sec
.
(
): Audio function activated
.
(
): Indicates which HDD is activated
.
( 9K ): The image file size
.
( HD ): Hard disk compartment
.
( SIZE 20G): The capacity of the installed hard disk
.
( REC ): Percentage of system recording
.
( PLAY ): Percentage of system playback
.
( IP : 192 . 168 . 1 . 90 ): Network IP Address
192.168.1.90
(
)
: External signal
.
(
x
): Cannot operate now
.
2.3.2 Channel Selection
CH1, CH2, CH3, CH4, Quad(
), and the
Seq./Save button are used to select the video
channel and zoom in factor. The following table
shows the functions in a different mode.
1+2 :59G 12.4 HR
QUALITY :
NTSC
RATE :
20 F/S
HD
SIZE
REC
1
20G
10.0%
2
39G
0.0%
IP :
10 / 01 / 2004 15:10:30