Hudson Valley Lighting ORCHARD PARK 7822 - Manual (Page 2)

Hudson Valley Lighting, Inc.
P.O. Box 7459
106 Pierces Road
Newburgh, NY 12550
(800) 814-3993
www.hudsonvalleylighting.com
7822
(Continued)
6. Fasten the white fixture wire to the white wire in the outlet box. Fasten
the wires to together with an approved fastener (wire nut). Starting about
1” below the fastener, tightly wrap connection with electrical tape so that
the tape seals the end of the fastener. Make sure that there is no exposed
wire or strands that could cause a dangerous short circuit !
7. Connect the black fixture wires to the black wire in the outlet box.
Fasten the joined wires as in step 6.
8.Using the end balls fasten the canopy to the outlet box. Loosen, rotate
and align the crossbar and canopy as necessary.
9.Remove the ring from the threaded socket.
Place glass over the socket and reinstall the ring.
10. Install the lamp(s) light bulb(s).
NOTE: This fixture is rated for 100 watt type A lamp (s).
DO NOT EXCEED RECOMMENDED WATTAGE !
11. Restore power to circuit at breaker or fuse box.
Approved fastener
(Wire nut)
Electrical tape