Hudson Valley Lighting ORCHARD PARK 7711 User Manual
Page 2
Hudson Valley Lighting, Inc.
P.O. Box 7459
106 Pierces Road
Newburgh, NY 12550
(800) 814-3993
7711
(Continued)
6. Fasten the white fixture wire to the white wire in the outlet box. Fasten the wires
to together with an approved fastener (wire nut).
Starting about 1” below the fastener, tightly wrap connection with electrical tape so
that the tape seals the end of the fastener.
Make sure that there is no exposed wire or strands that could cause a dangerous
short circuit!
7. Connect the black fixture wires to the black wire in the outlet box.
Fasten the joined wires as in step 6.
8. Using the end balls fasten the canopy to the outlet box. Loosen, rotate and align
the crossbar and canopy as necessary.
9. Remove the ring from the threaded socket. Place shade over the socket and
reinstall the ring.
10. Install the lamps (light bulbs)
NOTE: This fixture is rated for 100 watt type A lamp(s).
DO NOT EXCEED RECOMMENDED WATTAGE !
11. Restore power to circuit at breaker or fuse box.
Electrical tape
Approved fastener
(Wire nut)