Fig. 2 – Hudson Valley Lighting NAUGATUCK 5109-5123 User Manual
Page 2
8. Remove the ring from the threaded socket. Place the metal shade over the socket and reinstall the ring.
9. Place the glass diffuser into the retaining ring.
Bend the tabs down to hold it in position(to install 5123 the three lites island, please refer to fig. 2 for detail).
10. Install the lamp ( light bulb).
NOTE: The 5109 & 5111 are rated for a 100 watt type A lamp.
5115 is rated for a 150 watt type A lamp. The 5123 is rated for 3-100 watt type A lamp.
DO NOT EXCEED RECOMMENDED WATTAGE !
11. Loosen the 3 latches.
12. Align the locking studs in the shade with the bayonet slots in the ring.
Lift the ring and turn it so that the studs seat in the slots.
13. Lower the latches into position to additionally hold the diffuser and ring in place.
14. Restore power to circuit at breaker or fuse box.
Fig. 2
- ABERDEEN 629 (2 pages)
- ABERDEEN 622 (2 pages)
- ABINGTON 4902 (1 page)
- ADAMS 992 (1 page)
- ADJUSTABLES 9341 (1 page)
- ADJUSTABLES 341 (3 pages)
- ALBA L248 (1 page)
- ALBA L246 (1 page)
- ALDEN 962 (1 page)
- ALFORD 810 (1 page)
- ALPINE 7118 (2 pages)
- ALPINE 7112 (1 page)
- ALPINE 7102 (1 page)
- ALTAMONT 5618 (1 page)
- ALTAMONT 5519 (1 page)
- ALTAMONT 5508 (1 page)
- AMELIA 8994 (1 page)
- AMELIA 8991 (1 page)
- AMENIA 1034 (1 page)
- AMENIA 1032 (1 page)
- AMHERST 8518 (1 page)
- AMHERST 8512 (1 page)
- ANDOVER 7424 (1 page)
- ANDOVER 7414 (1 page)
- ARDSLEY L595 (1 page)
- ARLINGTON 382 (1 page)
- ASHLAND 6216 (1 page)
- ASHLEY 319 (1 page)
- ASHLEY 312 (1 page)
- ASTON L267 (1 page)
- AUBURN 1352 (1 page)
- AUBURN 1351 (1 page)
- AURORA 282 (1 page)
- OAKDALE 330 (1 page)
- AVALON 6212 (1 page)
- BALDWIN 729 (1 page)
- BALDWIN 722 (1 page)
- BARKER 472 (1 page)
- BARRINGTON 327 (2 pages)
- BARTON 3212 (1 page)
- BASKING RIDGE 6118 (2 pages)
- BASKING RIDGE 6113 (4 pages)
- BASKING RIDGE 6101-6104 (2 pages)
- BEACON 4228 (2 pages)
- BEACON 4222 (2 pages)