AEG LAVATHERM T500 - Manual (Page 25)

Troubleshooting
121
Troubleshooting
In the event of a malfunction try to solve the problem yourself using
the information below. If you call out the customer service to solve one
of the problems listed here or due to incorrect operation, a charge will
be made for the visit of the service engineer even during the warranty
period.
Problem Possible cause Remedy
The dryer is not working
Electric mains plug not
connected
Connect the mains plug
X START button not
pressed
Press the
X STARTbutton
No program set Set a program
Fill-in door open Close the fill-in door
Condensate container full
Empty the condensate
container
Fuse blown or automatic
circuit breaker in the
fusebox (house electrical
installation) defective
Check the fuse or
automatic circuit breaker.
Get an electrician to repair
any faults in the house
electrical installation.