Grace Digital GDI-EGBT500-510 ECOXBT - Manual (Page 3)

Quick Start USER GUIDE
USB CONNECTION & CHARGING

Charge the built-in rechargeable battery via USB cord (included) connected to your computer OR via a USB-to-
AC power adapter.

When connected to a power source via the USB connection on the back panel, the Battery LED on the front
panel (refer to Diagram 1.) will indicate the power status. IF not connected to the charging cable, the LED will
NOT indicate the power status.

RED LED indicates charging is in progress. A GREEN LED indicates the battery is fully charged.

The Power LED will flash 2 times quickly every 30 seconds when approx. 30 minutes of playtime remain.
NOTE: ECOXBT can charge while playing audio
CAP, USB POWER & AUX-IN CONNECTIONS

Pull tab on the cap to open the back panel
compartment for access to AUX-IN & USB
CHARGING connections

AUX-IN can be used as an optional connection
to play an audio device using a 3.5mm audio
cable connection.

Connect USB to computer or power outlet
using a USB to AC power adapter
USB & AUX-IN CONNECTIONS
Diagram 2