Grace Digital GDI-BTSP200 BT Speakers User Manual

Page 4

CONNECTIONS & OPERATION

_________________________________________________________________________

CONNECTIONS

_____________________________________________________________________________

Audio can be played using a Bluetooth® wireless technology music connection or a wired audio music connection

Bluetooth® & Wireless Audio Connection

STEPS:

1. Turn on the main AC power using the power switch at the back of the speaker.

NOTE: system remembers the previously used playback volume setting

2. The Bluetooth LED will light up in blue and initiates pairing (connection) in approximately 3

seconds.
The Bluetooth LED blinks rapidly between red & blue to indicate pairing in progress.
NOTE: Bluetooth mode is the default source selection

Select “Grace Digital” from the Bluetooth selections on your Bluetooth playback device /

Smartphone

Once the System is successfully paired with your Bluetooth device the Bluetooth LED
will blink one time approximately every 5 seconds

NOTE: pairing steps may differ depending on the Bluetooth device you are using.