Global Specialties RC-10 - Data Sheet - Manual (Page 2)

Ordering
Information
Model RC-10
P/N 105-104-0001
1486 Highland Ave., Unit 2,
Cheshire, CT 06410
TEL: (800) 572-1028
FAX (203) 272-4330
www.globalspecialties.com
5/02 ©2002 Interplex Electronics
• Specifications subject to change
without notice.
▼
I N S T R U M E N T S
www.globalspecialties.com
Resistance
All resistors in the RC-10 are rated at 1 Watt. Do not exceed this power level. The resistance
selector or “R” switch has 18 positions with a HI/LO selector switch for each position,
providing a total of 36 resistance values.
The resistor values on the “R”selector switch with no letter following are expressed in
Ohms. For example, the value marked “100” indicates 100 Ohms.
A “K” following the value indicates “times 1000”. For example, the value marked “100K”
indicates 100,000 Ohms.
An “M” following the value indicates megaohms, or times “1,000,000”. For example, the
value marked “10M” indicates 10,000,000 ohms.
Capacitance
The capacitors in the RC-10 have a voltage rating of 600 volts. Do not exceed this rating.
The RC Circuit Box provides a selection of 18 capacitance values.
Note the capacitance values on the right side of the “C” switch are in microfarads (µf),
corresponding to 0.000001 farad. Values on the left side of the switch are in picofarads (pf),
corresponding to 0.000001µf.
DISTRIBUTED BY: