Main features, Applications – GeoVision NVR System Lite V2 (Rev. B) User Manual
Page 3
Note:
GV IP cameras
1.
For GV IP cameras (excluding GV Fisheye), stream 1 is used for recording and single view, and stream 2 for live viewing in multi
divisions.
2.
The default resolution for stream 1 is set at its maximum. Several resolution, aspect ratio and codec options are available for
each IP camera, except GV‐Fisheye cameras.
3.
It is highly recommended to set the panel resolution to 1280 x 1024 (default) or lower when connecting to GV Fisheye to get
better CPU performance.
Third‐party cameras
1.
For third‐party cameras, be sure the resolution and codec are configured as specified above to achieve the best performance
and maximum frame rate. To find the supported third‐party cameras, go to
Frame Rate
1.
Total Frame Rate equals to the Max. Frame Rate multiplies the supported channel numbers.
2.
If you record the images, access live view and see the playback simultaneously, the CPU loading will increase massively.
Therefore, the frame rates may drop.
Main Features
Compact and sleek
Up to 16 channels
Automatic connection to GV IP cameras
Support for 3rd party IP cameras (license required)
All‐in‐one solution (Live View, Playback, Recording, Backup, CMS)
GPU decoding and dewarping
H.264 / MJPEG / MPEG4
Dual video streams
VGA and HDMI outputs
1 TB or 1.5 TB hard drive
Video analysis
Standing mount and VESA mount options
Direct recording to the internal hard drive
Low power consumption
Smart phones access
Fisheye camera dewarping function
Multiple (29) languages
Applications
One Shop, One Fisheye Camera, One GV‐NVR System Lite V2
The easiest and most cost‐efficient solution for video surveillance
GV-NVR System Lite V2 (Rev.B)
October 17, 2013
- 3 -