GeoVision Hot Swap NVR System V5 (Rev. B) – 4U, 20-Bay User Manual
Page 5
GV-Hot Swap NVR System V5 (Rev. B) – 4U, 20-Bay
March 20, 2014
-5-
Options
With 12‐point digital inputs, this card can expand the GV‐Hot Swap NVR V5 up to 16 sensor inputs.
With 12‐point relay outputs, this card can expand the GV‐Hot Swap NVR V5 up to 16 alarm outputs.
GV‐Data Capture V3 Box can integrate the GV‐Hot Swap NVR V5 to an electronic POS system, while GV‐Data
Capture V3E Box can establish such integration through LAN or Internet.
An easy way for serial port extension. This hub can add 4 RS‐232/RS‐485 serial ports through the GV‐Hot
Swap NVR V5's USB port.
This unit can add 1 RS‐232/RS‐485 serial port through the GV‐Hot Swap NVR V5's USB port.
GV‐IO Box 4 provides 4 inputs and 4 relay outputs, and supports both DC and AC output voltages. A USB port
is also provided for PC connection.
GV‐IO Box 8 provides 8 inputs and 8 relay outputs, and supports both DC and AC output voltages. A USB port
is also provided for PC connection.
GV‐IO Box 16 provides 16 inputs and 16 relay outputs, and supports both DC and AC output voltages. A USB
port is also provided for PC connection.
GV‐Joystick facilitates the PTZ camera control. It can be either plugged into the GV‐Hot Swap NVR V5 for
independent use or connected to GV‐Keyboard to empower the operation. However, this device can only
work on GV‐System version 8.2 or later.
Graphic Card
The Graphic Card comes with HDMI, DVI‐D, and VGA ports to support additional displays. The number of
monitors supported varies based on models and combination of optional cards. Up to 5‐7 monitors can be
supported.
Gigabit Network Card
The Gigabit Network Card can support 2 gigabit ports. The number of gigabit ports supported varies based on
models and combination of optional cards. Up to 5 gigabit ports can be supported.
** Currently, these models do not support optional Gigabit Network Cards:
‐ GV‐3008H V5
‐ 4U (20‐bay) and 3U (16‐bay) models with 2 built‐in GV‐Capture Cards or 3 built‐in GV‐SDI‐204 Cards
RAID Card
The RAID Card supports a maximum of 8 SATA hard drives and enhances data protection. The supported RAID
types include RAID 0, RAID 1, RAID 5, RAID 6, RAID 00, RAID 10, RAID 50 and RAID 60.
** This device is only available for all 3U (8‐bay) models.
** Currently, these models do not support optional RAID Card:
‐ GV‐3008H V5
‐ 3U (8‐bay) models with 2 built‐in GV‐1480 / 1240 / 1120 Cards
Redundant Power Supply
The Redundant Power Supply comes with 2 hot‐swap modules for 3U models and 3 hot‐swap modules for 4U
models. When 1 module is down, the remaining module(s) can still supply full power to the system.
‐ 3U models: 600 W 1+1 mode; 100 ~ 240 V, 50/60 Hz
‐ 4U models: 1000 W N+1 mode; 100 ~ 240 V, 50/60 Hz
Note: Please contact our sales representatives for more information when combining optional cards for your system.