GeneralAire GUV2018 - Manual (Page 3)

G
ENERAL
A
IRE
GUV-2018
Dual Voltage Phototcatalytic
Air Purifier
Installation & Maintenance
Instructions
UNPACKING THE UNIT
Each GeneralAire GUV-2018 Air Purifier unit is shipped with
the germicidal lamp p laced i n a tube with p rotective
packaging. Carefully r emove lamp f rom t he t ube taking
care to not t ouch the g lass portion with bare hands. Oils
from the hands can cause “hot spots” which reduce lamp life
.
Handle by the porcelain caps or use a soft cloth. If you
accidentally touch a l amp, w ipe it o ff using a soft cloth
dampened with rubbing a lcohol. The lamp is fragile and
proper care must be taken when it is removed from packaging.
Be sure the following parts are included:
• GUV-161 Air Purifier
• 16” Germicidal Lamp (packed in tube)
• Four Sheet Metal Screws and two keps nuts
• Titanium photocatalytic reflector
• Installation & maintenance instructions
When installing and using this electrical equipment, basic safety precautions
should always be observed including the following:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. SAVE THESE INSTRUCTIONS.
3. Always be sure the unit is unplugged during installation or service procedures.
4. Ultraviolet light produced by the UV lamp is harmful to your eyes.
Do not look directly at the lamp. Should it become necessary to view the
lamp, use UV-protected safety.
IMPORTANT SAFETY INSTRUCTIONS