Asus M2A-VM - Manual (Page 54)

2-10 Chapter 2: BIOS setup
2.1.6 ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore
the BIOS file when it fails or gets corrupted during the updating process. You can
update a corrupted BIOS file using the motherboard support CD/DVD, the floppy
disk, or the USB flash disk that contains the updated BIOS file.
Recovering the BIOS from the support CD/DVD
To recover the BIOS from the support CD/DVD:
1. Turn on the system.
2. Insert the motherboard support CD/DVD to the optical drive.
3. The utility displays the following message and automatically checks the CD
for the BIOS file.
BIOS ROM checksum error
Detecting IDE ATAPI device...
Prepare the motherboard support CD/DVD, the floppy disk or the USB flash
disk containing the updated motherboard BIOS before using this utility.
4. Restart the system after the utility completes the updating process.
• Only the USB flash disk with FAT 32/16/12 format and single partition can
support ASUS CrashFree BIOS 3. The device size should be smaller than
8GB.
• Flash time takes around one (1) minute.
• DO NOT shut down or reset the system while updating the BIOS! Doing so
can cause system boot failure!
When found, the utility reads the BIOS file and starts flashing the corrupted
BIOS file.
Recovering the BIOS from a floppy/USB flash disk
To recover the BIOS from a floppy/USB flash disk:
1. Insert the floppy/USB flash disk that contains BIOS file to the FDD/USB port.
2. Turn on the system.
3. The utility will automatically checks the devices for the BIOS file. When found,
the utility reads the BIOS file and starts flashing the corrupted BIOS file.
4. Restart the system after the utility completes the updating process.
To use the CrashFree BIOS 3 feature on this motherboard, you will not see the
screen display when the BIOS crashes even if you reboot the computer.