Acura 2008 MDX - Manual (Page 292)

The HFL will accept a numeric, four-
digit passcode that you can use for
security purposes.
Follow the system setup
procedure as described previously.
Press and release the Talk button.
After the beep, say ‘‘Yes.’’
The HFL response is ‘‘What is the
four-digit number you would like
to set as your passcode?’’
Press and release the Talk button.
After the beep, say the four-digit
passcode you want to use. For
example, say ‘‘1, 2, 3, 4.’’ The HFL
response is ‘‘1, 2, 3, 4. Is this
correct?’’
Press and release the Talk button.
If you say ‘‘No.’’ after the beep, the
HFL response is ‘‘Security will not
be used. The system setup is
complete.’’
Once a passcode is set, you can lock
the HFL so it only operates after the
passcode is entered.
The HFL will prompt you for your
passcode each time the ignition
switch is turned to the ON (II)
position and you press the Talk
button. You will only be asked for
the passcode once per ignition
cycle. If the passcode is set, its
response is ‘‘The system is locked.
What is the four-digit passcode?’’
Press and release the Talk button.
After the beep, say your four-digit
passcode. For example, say ‘‘1, 2, 3,
4.’’
If the passcode is correct, the HFL
response is ‘‘Main menu.’’ If the
passcode is not correct, the HFL
response is ‘‘1,2,3,4 is incorrect.
Please try again.’’ Go back to the
step 2.
If you forget your passcode and you
cannot activate the HFL, consult
your dealer to cancel the passcode.
Press and release the Talk button.
After the beep, say ‘‘Yes.’’ The
HFL response is ‘‘Security is on.
Each time the vehicle is turned on,
the passcode will be required to
use the system. The system setup
is complete. Returning to the main
menu.’’
1.
4.
5.
6. 2.
3.
1.
2.
3.
To set your passcode, do this:
To enter your passcode, do this;
Setting Your Passcode
Bluetooth HandsFreeLink
286